文笔好的高质量的很肉,乡村娘家通吃

product category
塔磨机 Location: Home > Products > Tower Mill Tower Mill
    • Tower mill
    • Tower mill
    • Tower mill
    • Tower mill
Tower mill

The TM series metal mine tower mill independently designed and developed by Sinosteel Tianyuan can be widely used in the ultra-superiority of a variety of ores and solid particles, including gold, silver, copper, nickel, manganese, iron, zinc-lead ores. Fine grinding, the equipment and parts of the equipment have reasonable structure, small footprint, stable operation, low noise, long service life, considerable economic benefits, and the grinding effect reaches the domestic advanced level.
Product Details
The TM series metal mine tower mill independently designed and developed by Sinosteel Tianyuan can be widely used in the ultra-superiority of a variety of ores and solid particles, including gold, silver, copper, nickel, manganese, iron, zinc-lead ores. Fine grinding, the equipment and parts of the equipment have reasonable structure, small footprint, stable operation, low noise, long service life, considerable economic benefits, and the grinding effect reaches the domestic advanced level.

Working principle :

Due to the centrifugal force, gravity and friction, the machine achieves an orderly motion cycle and basic balance of the macroscopic forces in the stirring screw during the rotation of the stirring screw at a low speed. In the stirring screw, the screw is smaller than the lifting speed. Ascending and descending spirally between the inner lining and the outer edge of the spiral. However, due to the non-uniformity of the force, dynamic speed differences and force changes are caused on the microscopic level, which cause the materials to be strongly squeezed, ground, and force-broken, micro-sheared, and broken. The conveyance of qualified materials rises with the conveying medium, and after the internal classification, it overflows from the upper part of the tower mill barrel.

Technical advantages:
The grinding efficiency is greatly improved, the equipment covers a small area, the noise is low, and the energy consumption is saved.
The granularity of the milled particles is settled and separated twice to uniformly control the particle size distribution and improve the qualified particle size occupancy of the product.
The inner wall wear-resistant lining is made of domestic leading magnetic rubber material, which effectively prolongs the service life.
The lower part of the barrel adopts an open door design, which is convenient for daily maintenance and repair.

Application Note 1: Shanxi Tianye Mining Company

Model: TM1800-220 barrel inner diameter 1800mm power 220kw

Uses: iron ore tailings regrind

Process parameters: Grinding granularity-200 mesh > 93% Discharging granularity-400 mesh > 95% Capacity 18t / h ~ 25t / h

Application example 2: Longkou Jinxin Gold Co., Ltd. of Jingwei Group

Model: TM1800-200 barrel inner diameter 1800mm power 200kw

Uses: Grinding of gold concentrate before cyanide leaching

Process parameters: input granularity -200 mesh 50% ~ 70% output granularity-400 mesh 85% ~ 95% processing capacity 15t / h ~ 20t / h

Application Example 3: Yunnan Hualian Zinc Indium Co., Ltd.

Model: TM1000-55 barrel inner diameter 1000mm power 55kw

Uses: copper coarse concentrate regrind

Process parameters: Grinding granularity -200 mesh 60% ~ 70% Discharging granularity-400 mesh 70% ~ 80% Processing capacity 2t / h ~ 4t / h

Application example 4: Guizhou Panjiang Shenrui Clean Coal Technology Co., Ltd.

Model: TM1200-90 barrel inner diameter 1200mm power 90kw

Use: Comprehensive recovery of slime slime

Process parameters: Grinding granularity -200 mesh 70% ~ 80% Discharging granularity-200 mesh 90% ~ 95% Capacity 8t / h ~ 12t / h

Application Example 5: Sinosteel Tianyuan Nanjing Material Factory

Model: TM800-30 barrel inner diameter 800mm power 30kw

Uses: Wet grinding electrolytic manganese

Process parameters: granularity of incoming grinding <20mm, granularity of outgoing <10 & mu; m

model

Power / KW

Voltage / KV

Capacity (t / h)

TM-300

11

300

0.1-0.5

TM-600

twenty two

600

0.3-1

TM-800

30

800

1-3

TM-1000

55

1000

2-5

TM-1200

110

1200

4-8

TM-1500

180

1500

7-15

TM-1800

220

1800

12-25

TM-2000

355

2000

20-35

TM-2500

500

2500

30-50

TM-3000

800

3000

50-80

TM-3500

1000

3500

70-100

TM-4000

1200

4000

90-130

Remarks: The data in the table is only for selection reference. The actual situation should be determined according to the nature of the processed materials and the required product size or industrial test. At the same time, we can provide products not listed in the table according to user needs, and the selection is more flexible and practical.

Inquire Now
Details you want to consult *
Please leave your name *
Please leave your phone number *
Your usual contact mailbox
Verification code *
Hot Products